FLYSKY FS-i6 6Channel 2.4GHz AFHDS2A RC Transmitter w/FS-iA6B Receiver for RC Multirotor Helicopter Airplane Glider Quadcopter (Mode_2)

The FLYSKY transmitter and receiver have been pre-bound before delivery.If you are using another transmitter or receiver, follow the steps below to bind to the B/VCC port on the receiver. 1, Connect the supplied bind cable to the B/VCC port on the receiver. 2, Insert power into any other port. 3, Hold the "BIND KEY" while powering on the transmitter to enter bind mode. 4, Remove the power and bind cable from the receiver. Then connect the power cable to the B/VCC port. 5, Check the servos' operation. If anything does not work as expected, restart this procedure from the beginning. FS-i6 Specifications: Channels: 6 CH Model Type: Glider/Heli/Airplane RF Range: 2.40-2.48GHz brandwidth: 500KHz RF Power: Less Than 20dBm 2.4ghz System: AFHDS 2A and AFHDS Code Type: GFSK Sensitivity: 1024 Low Voltage Warning: less than 4.2V DSC Port: PS2;Output:PPM Charger Port: No ANT length: 26mm*2(dual antenna) Transmitter Weight: 392g Transmitter Size: 174x89x190mm Package Size: 23.5x21.2x10.6cm Package Weight: 676g Power: 6V, 4*AA Battery(Not included) Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight. On-line update:yes Certificate: CE0678,FCC Model Memories: 20 Control Range: 500m FS-iA6B Specifications: Channel: 6CH Frequency Range: 2.4055--2.475GHZ brand Width Number: 140 Transmitting Power: ≤ 20dBm RF Receiver Sensitivity: -105dbm 2.4G system: AFHDS 2A Code type: GFSK Antenna Length: 26mm * 2(dual antenna) Input Power: 4.0-6.5V DC Dimension: 47x26.2x15mm Weight: 14.9g i-Bus Interface: Yes Data Acquisition Interface: Yes Model Type: Airplane/Glider/Helicopter Compatible Transmitter: Compatible with FS-i6,FS-I6X,FS-I6S,FS-i4 Package Included: 1 x FS-i6 transmitter 1 x FS-iA6B Receiver 1 x Manual

• This radio system uses low power electronic components and sensitive receiver chip. The RF modulation uses intermittent signal thus reducing even more power consumption.
• This radio system uses a high gain and high quality multi directional antenna, it covers the whole frequency band. Associated with a high sensitivity receiver, this radio system guarantees a jamming free long range radio transmission.
• FS-I6 rc transmitter suitable for racing drone, fixed-wing, quadcopter, multiple rotors
• Each transmitter has a unique ID, when binding with a receiver, the receiver saves that unique ID and can accepts only data from the unique transmitter. this avoids picking another transmitter signal and dramatically increase interference immunity and safety.
• FLYSKY FS-i6 6CH 2.4GHz AFHDS2A RC Transmitter w/ FS-iA6B Receiver